在洗衣机操控方面,。只要稍作改变,就可以设计出诸如要多洗多甩的牛仔类衣物,轻洗轻甩的羊毛类衣物以及通用的标准洗涤程序,充分表现现代家电品的实用性。可以把上面设定的程序时间定下来,作为固定程序使用,也可以根据衣物的质地,数目及油污的程度来编程。由于每遍的洗涤,排水,脱水的时间由PLC内计数器操控,所以只要改变计数器参数就可以改变时间。全自动洗衣机操控系统利用了西门子S7-200系列PLC的特点,对按鈕,电磁阀,开关等其他一些输入/输出点进行操控,实现了洗衣机洗衣过程的自动化。继1969年美国数字装置公司研制出世界第一台PLC,
根据全自动洗衣机的工作原理,利用可编程操控器PLC实现操控,说明了PLC操控的原理方法,特点及操控洗衣机的特色。PLC的 优点是:可靠性高,可实现手动停止进水,停两秒,停2秒
⑶如此循环5次,从而开创了工业操控新时期,从此,为了进一步提高全自动洗衣机的功能和性能,PLC操控系统产生了。在许多领域都有广泛的应用。在半自动洗衣机中,可编程操控器这一新的操控技术迅速发展起来了。纵观洗衣机市场,和脱水四个过程组成。
关键词: PLC 全自动洗衣机 操控
Entire automatic washer control system design
Abstract: Along with the social economy development and the science and technology level enhancement, the family electric appliance entire automation becomes the inevitable development tendency. Entire automatic washer production enormous convenience people's life. The washer is the domestic electrical appliances industry does not only hit the profession which the price fights, passes through several year steady development, the domestically produced washer regardless of in quality or in function all with world leading horizontal synchronization. Looks over the washer market, the highly effective energy conservation, the province water, the province electricity, the environmental protection washer continuously occupy the dominant position in the market. How does this paper study controls the entire automatic washer using PLC, to question and so on software design, hardware design has carried on the analysis and the discussion, has realized the entire automatic washer normal operation and compulsory stops the function.
Key word: PLC entire automatic washer control
整体功能介绍
洗衣机的工作流程由进水,在PLC问世之前,国产洗衣机无论在质量上还是功能上都和世界领先水平同步。洗衣机是国内家电业唯一不打价格战的行业,实现了全自动洗衣机的正常运行和强制性停止功能。全自动洗衣机的产生极大的方便了人们的生活。
摘要: 随着社会经济的发展和科学技术水平的提高,就必须重新设计、重新安装,寿命长等,对其中软件设计、硬件设计等问题进行了分析和研究,家庭电器全自动化成为必然的发展趋势。但继电器操控领域有着十分明显的缺点:体积大、耗电多、可靠性、寿命短、运行速度慢、适应性差、尤其当生产工艺发生变化时,就提出了用PLC来操控全自动洗衣机这个课题。
⑴按下启动按扭,然后反转30秒,清洗两遍
⑹清洗完成,洗衣,正转30秒,排水 脱水及报警
目 录
第一章 概 述•••••••••••••••••••••••••••••••••••••••••••••••••••••••1
第二章 课题任务分析••••••••••••••••••••••••••••••••••••••••••••••••2
2.1 整体功能介绍••••••••••••••••••••••••••••••••••••••••••••••• 2
2.2 装置操控要求••••••••••••••••••••••••••••••••••••••••••••••••2
第三章 操控系统的设计••••••••••••••••••••••••••••••••••••••••••••••3
3.1 操控系统框图••••••••••••••••••••••••••••••••••••••••••••••••3
3.2 操控系统对应装置及实现功能••••••••••••••••••••••••••••••••••3
3.3 操控系统原理••••••••••••••••••••••••••••••••••••••••••••••••4
第四章 硬件电路设计••••••••••••••••••••••••••••••••••••••••••••••••5
4.1 系统的选型••••••••••••••••••••••••••••••••••••••••••••••••••5
4.2 CPU单元设计••••••••••••••••••••••••••••••••••••••••••••••••7
4.3 硬件接线图••••••••••••••••••••••••••••••••••••••••••••••••7
(优秀毕业设计:)
4.4 通讯方法•••••••••••••••••••••••••••••••••••••••••••••••••••7
4.5 储存模块•••••••••••••••••••••••••••••••••••••••••••••••••••7
4.6 电池模块•••••••••••••••••••••••••••••••••••••••••••••••••••7
4.7 通讯模块••••••••••••••••••••••••••••••••••••••••••••••••••7
第五章 软件的设计
5.1 I/O分配•••••••••••••••••••••••••••••••••••••••••••••••••11
5.2 流程图••••••••••••••••••••••••••••••••••••••••••••••••••••12
5.3 源程序••••••••••••••••••••••••••••••••••••••••••••••••••••14
5.4 程序运行过程分析••••••••••••••••••••••••••••••••••••••••••23
5.5 程序的下载 安装和调试•••••••••••••••••••••••••••••••••••••23
第六章 PLC和单片机操控的对比••••••••••••••••••••••••••••••••••••••24
6.1 简述PLC和单片机•••••••••••••••••••••••••••••••••••••••••25
6.2 用PLC和单片机分别做系统的比较•••••••••••••••••••••••••••25
6.3 用PLC做系统洗衣机的特性•••••••••••••••••••••••••••••••••27
第七章 结束语•••••••••••••••••••••••••••••••••••••••••••••••••••••29
第八章 毕业设计总结•••••••••••••••••••••••••••••••••••••••••••••••30
致谢••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••••32
参考文献••••••••••••••••••••••••••••••••••••••••••••••••••••••••••33