基于单片机的IC卡智能水表设计(毕业论文20000字,外文翻译,CAD图1张)
摘 要
为适应国家用水制度的改革。
本论文主要设计研究基于单片机的IC卡智能水表电路,同时具有安全保护电路、记忆单元电路、通信接口电路,势在必行。
关键词：单片机；IC卡；液晶显示；记忆模块
Design of the Water Meter IC Card System Based On Sing-chip
Abstract
In order to adapt the reform of the nation system of water supply,studying and making use of the modern intelligence technique to realize the automatic supervision of the water supply,lightening the funds pressure because of“supply water first behind charge”of the department supplying water,reducing the trouble and dispute of copying the form and charging monthly,using the modern science technique change the current administration structure of using water and water supply industry is imperative under the situation.The application of intelligent water meter not only improves work efficiency of intelligent water meter not only improves work efficiency of the department supplying water and realizes using water electronically but also creates a condition for using water frugally and rationally.Because of these charactetistics,intelligent water meter obtained more and more widespread application.
In this paper, the main design based on single-chip pre-charges the IC card water meter system hardware circuit design, its main function is based on AT89C51 single-chip microcomputer as the core, the realization of IC card reader, LCD display control, the control solenoid valve, pulse extraction, at the same time security protection circuit, memory cell circuit, communication interface circuit, the signal meter to complete the reading, writing and processing, monitoring the work function of water meters. In this paper, one by one for each module studied. Full detail of the hardware circuit design flow, for the design of the Central African contactless IC card reader circuit module, liquid crystal display circuit module and circuit module, such as reading and writing H6152 working principle and function are described in detail.
Key words: SCM; IC Card ; Liquid crystal display; Memory modules
目 录
摘 要 1
Abstract 2
第1章 绪论 3
1.1课题背景及意义 3
1.2 传统水表 4
1.2.1 传统水表的主要结构 4
1.2.2 传统水表的主要特点 4
1.3 智能水表 4
1.3.1 智能水表的特点 5
1.3.2 国内外智能水表的发展现状及发展趋势 6
第2章 智能水表的组成和单片机的选择 7
2.1智能水表系统硬件组成 7
2.2 AT89C51单片机简介 8
2.2.1 89C51单片机的基本组成 8
2.2.2 89C51单片机引脚及其功能 9
第3章 系统各模块硬件电路设计 10
3.1 IC卡读写电路 10
3.1.1 Mifare 1射频IC卡 10
3.1.2 H6152读写模块 13
3.1.3 IC卡读写电路的原理及说明 13
3.2 液晶显示电路 16
3.2.1 液晶显示模块 16
3.2.2 电源模块 18
3.2.3 单片机模块 20
3.3 记忆单元电路 20
3.3.1 I2C总线简介 20
3.3.2 AT24C01简介 22
3.3.3 硬件原理图 22
3.4 电磁阀操控电路 23
3.5 其它模块电路 24
第4章 系统各模块软件设计 25
4.1 IC卡读写软件设计 25
4.1.1 H6152内部寄存器 25
4.1.2 H6152通信协议与操控命令 27
4.1.3 IC卡读写电路程序流程图及部分程序 31
4.2 液晶显示电路软件设计 32
4.2.1液晶操控驱动器指令集 32
4.2.2程序流程图及部分程序 34
4.3 记忆单元电路软件设计 36
第5章 结论 37
参考文献 38
谢 辞 39
附录：电路图 40