基于单片机防酒后驾驶操控系统电路设计(附程序,硬件电路原理图)(包含任务书,开题报告,毕业论文共14000字,程序清单)
摘要:对洒后驾车导致交通事故频繁发生的现象。系统可显示司机摄入的酒精浓度,a anti drunk driving control system is designed.
The designed system is constructed with alcohol sensor, the ADC0809 converter, the 89C51MCUcontroller, speech warning system, LED, relay and the motor, etc. The conversion between voltage and concentration in different range is treated as linear relationship. Conversing the voltage signal through the A/D conversion at the control of the single-chip, obtaining the digital voltage signal; displaying the concentration in the digital tube display module. When the alcohol testing result exceeds the safe limit, power supp ly of the starting system will be cut to stop the car from start up.
The designed system requires the driver to take a breath-test before the ignition can be turned on and activates a lock if the result is above a certain level. The device is seen as a way to stop people who have been convicted of driving under the influence from offending again.
Keywords: Gas sensor, A/D conversion, Single-chip Microcomputer
研究内容
应用单片机技术设计一个基于单片机的防酒后驾驶操控系统设计。
具体技术要求如下:
1,单片机
Based on SCM preventing drunken driving control system circuit design
Abstract: Aimed at the increasing accidents caused by drunk driving,使汽车无法正常启动。
该系统需要驾车者在汽车点火前先进行吹气测试,如果测试结果超过安全水平,同时显示各房间的温度。
关键词:气体传感器,模数转换,数据进行数字操控算法,操控系统会自动切断汽车启动系统,操控加热执行机构,当司机体内酒精浓度超标时,并通过数码管实时显示酒精浓度,并具有实时监测和光电、语音报警功能
1,实现了自动操控功能。该设备可以用来防止有酒后驾车的人再次犯错。
#p#副标题#e#
目 录
第一章 前言 1
1.1 选题的依据及意义 1
1.2 国内外发展概况 2
1.3 本课题的主要研究内容 3
第二章 防酒后驾驶操控系统组成及工作原理 4
2.1 系统设计要求与技术指标 4
2.2 系统组成 4
2.3 系统功能 5
第三章 防酒后驾驶操控系统硬件电路设计 6
3.1酒精传感器测试电路的设计 6
3.2 A/D转换电路的设计 7
3.3单片机最小系统 10
3.4显示电路的设计 12
3.4.1 HD7279介绍 12
3.4.2 HD7279连接 13
3.5 报警电路的设计 15
3.5.1光电报警 15
3.5.2 声音报警 16
3.6汽车制动操控电路 17
第四章 防酒后驾驶操控系统软件设计 18
4.1 软件整体设计思路 18
4.2 主程序模块的设计 18
4.2.1显示子程序 19
4.2.2 操控子程序 22
4.2.2 操控子程序 23
4.3 数据采集及处理模块 24
4.4 算法子程序模块 27
第五章 系统软件调试 30
5.1 显示模块的调试 30
5.2 A/D转换模块的调试 30
5.3 报警模块、继电器操控子程序子程序的调试 30
5.4 总体调试 31
第六章 总结 32
6.1 完善功能 32
6.2 心得体会 32
致 谢 33
参考文献 34
附 录 35
附录A 硬件电路原理图 35
附录B 程序清单 37