基于单片机的步进电机式汽车仪表的设计(含电路原理图,程序)(课题申报表,任务书,开题报告,中期检查表,外文翻译,论文21000字,程序,答辩PPT)
摘 要
汽车仪表是驾驶者和汽车的交互界面, such as real-time information, mileage, is an integral part.
Auto instrument used in this paper, design of stepper motor type STC89C52 single-chip microcomputer control micro step motor, driven in a pointer to display the car relevant real-time information in the process, through the microcontroller programming system of automatic control and precise control, enables the motor speed value to visual inspection, and display on the LCD screen in 1602.Paper firstly introduces the basic theory of SCM, and then involved in the software design of MCU, LCD screen, step motor unit such as a detailed explanation of the design process and working principle, and expounds the principles of speed detection, because of the stepper motor is an important link, this design also illustrates the stepper motor, so finally through to the hardware and software debugging repeatedly, completed the design original purpose, implementation of the stepper motor's speed and displayed on the screen, this design has the characteristics of intuitive, sensitive, simple control.
Keywords: STC89C52; 1602 LCD screen; stepper motor; The human-computer interaction
主要内容
通过对汽车仪表系统的基本功能的分析, fault, For the driver to provide the required operation parameters。
第五章:系统的调试过程主要分析了硬件调试的过程以及对论文的工作总结及汽车仪表发展的展望。
目 录
第1章 概述 1
1.1 课题的背景、目的及意义 1
1.2 国内外发展概况 2
1.3主要内容 3
1.4论文章节安排 4
第2章 系统的方案设计 5
2.1 系统各单元的方案论证 5
2.2 系统总体设计方案 7
2.3系统的电路原理图 7
2.4 本章小结 8
第3章 系统的硬件设计 9
3.1 单片机最小系统模块 9
3.2 时钟复位模块 12
3.3电源模块 12
3.4 LCD显示模块 12
3.5 按键开关电路模块 14
3.6 步进电机驱动模块 14
3.7 检测霍尔元件模块 16
3.8 PROTEL硬件开发软件 18
3.9 本章小结 19
第4章 系统的软件设计 20
4.1软件设计环境 20
4.2系统的软件部分设计 23
4.3编程语言的选择 24
4.4主程序的设计 24
4.5本章小结 26
第5章 系统的调试过程 27
5.1 测试的目的方式 27
5.2 测试的内容 28
5.3 测试的结果记录 28
5.4 本章小结 29
结论 30
致谢 31
参考文献 32
附录 33