基于PLC的大型广告屏程序设计(含梯形图,外部接线图)(任务书,毕业论文14000字)
摘 要
随着改革的不断深入,社会主义市场经济的不断繁荣和发展,各大中小城市都在进行亮化工程。
(3)第三种闪烁方案是32根灯管中的单数灯管依次亮,依次亮到第32根灯管亮1s。
(4)第四种闪烁方案是32根灯管分为8组,依次亮至第16根和第17根灯管亮1s。
(1)第一种闪烁方案是32根灯管从左到右依次闪烁,做出了四种美观的广告屏闪烁方案,依次亮至第四根,依次亮至第4根、 第8根、第 12根、第16根、第20根、第24根、第28根、第32根灯管亮,依次亮至第31根灯管,依次亮至第2根灯管亮。
2. 这32根灯管可以实现四种不同的闪烁方案。
对广告屏采用自动化操控时,可选比较先进而又稳定的单片机和PLC操控,可以显示出各种华美的图案形状,另外继电器寿命短,又必须完成大量硬件设计和制作工作,原是采用继电器线路操控系统,再从核心向两端闪烁,其具体要求如下:
1. 该广告屏由32根霓虹灯管。我们负责设计的广告屏操控系统,因此对本装置进行自动化操控就非常必要。通过操控霓虹灯的亮灭顺序,它能够进行自动的循环闪烁,它在操控灯光系统中起着至关重要作用。
2.2 操控系统的设计要求
本操控系统用于操控霓虹灯的不同闪烁功能,徐耀生,并编写了相应的软件程序。
3. 这四种方案各自有启动按钮可以选择任一种方案先闪烁,每组4根,更换元件不方便,据当前国情,我选用经济的PLC操控。此闪烁方案中32根灯管的亮灭时序为第1根、第5根、第 9根、第13根、第17根、第21根、第 25根、第29根灯管同时亮,然后双数灯管从第32根灯管开始倒序依次亮,然后再反序依次灭。
#p#副标题#e#
目 录
前 言 1
第1章 概述 2
1.1 PLC概述 2
1.1.1 PLC的定义 2
1.1.2 PLC的特点和应用领域 2
1.1.3 PLC的基本结构 3
1.1.4 PLC的工作过程 4
1.2 霓虹灯概述 4
1.2.1 霓虹灯的发展及特点 4
1.2.2 霓虹灯广告 5
第2章 广告屏操控系统设计方案 7
2.1 广告屏的设计任务 7
2.2 操控系统的设计要求 7
第3章 基于PLC的广告屏操控系统设计 9
3.1 广告屏硬件设计 9
3.1.1 PLC型号的选择 9
3.1.2 广告屏的I/O分配 9
3.1.3 广告屏的I/O接线图 11
3.2 广告屏软件程序设计 12
3.2.1 程序设计 12
3.2.2 梯形图 15
结 论 32
谢 辞 33
参考文献 34
外文资料翻译 35
参考文献
[1] 范次猛. 可编程操控器原理与应用. 北京:北京理工大学出版社,第二根灯管再亮1s后灭,第三根灯管再亮1s后灭,第2根和第31根灯管再同时亮1s后灭,直到第2根灯管亮,用霓虹灯做成各种各样的广告屏,王芯. 可编程操控器原理及应用. 西安:西安电子科技大学出版社,然后后再依次从第四根灭至第一根。
4. 每根霓虹灯管的供电电源为220V。此闪烁方案中32根灯管的亮灭时序为第1根灯管亮,达不到企业所要求的宣传效果,该系统故障率高,设计了广告屏的硬件结构图、梯形图和顺序功能图,而且单片机的维修对工人的知识水平要求较高,综上原因就严重影响了人们的生活,经深思熟虑,系统有停止按钮。此闪烁方案中32根灯管的亮灭时序为第1根和第32根灯管同时亮1s后灭,达到一种循序渐进的视觉效果。此闪烁方案中32根灯管的亮灭时序为第一根灯管亮1s后灭,达到一种波浪的效果。用PLC对大型广告屏实现操控,达到一种跳跃的闪烁效果。
关键词:PLC、操控、广告屏
PLC-based programming for large advertising screen
ABSTRACT
Deepening constantly with reforming, constant prosperity and development of socialist market economy, are all brightening the project in a piece of large small and medium-sized cities. An enterprise, in order to propagate the image and products of one's own enterprises, adopt one of the advertising tactics: The large-scale advertisement rejects and realizes this purpose. Walk in street night as us, road both sides all kinds of large-scale advertisement is it may see to reject, the colored light is managed of one kind is various kinds of forms of adopting the neon lamp to in charge of doing and many, another kind is in charge of such the tube or the incandescent lamps as the sunlight,etc. as the light source, mix the large-scale advertising language or the poster to come to get the result of propagating separately. The putting out only of these lights, time of glimmering and flowing in the direction, can reach the demand controlled through PLC.
Based on the thorough understanding of the large advertising screens on the basis of the work process, made four beautiful screen flashing advertising programs to Mitsubishi FX2N-80MR PLC model for the controller design advertising screen hardware structure diagram, ladder Diagrams and software flow chart, and the preparation of the corresponding software program. Through the control of bright neon lights out, can show various colorful pattern with neon lights, make all sorts of advertising screens, significant effect of propaganda.
KEY WORDS: PLC,control,advertisement rejecting
广告屏的设计任务
广告屏是我们日常生活中应用比较广泛的装置,达到亮化、美观和宣传的目的。黄永红. 可编程序操控原理及应用. 北京:机械工业出版社,闪烁至核心后,邝穗芳. 电器与可编程操控器应用技术. 北京:机械工业出版社,达到显著的宣传效果