18s后。如果为连续工作方法,再延时2s,先进性

Abstract
This paper is based on the machinery design and machinery(PLC) principle and the 3d drawing software and related knowledge and theory, by collecting relevant data of sewing machine and reading the related literature books and referring to the sewing machine in the tailor shop, first of all, due PLC uese the main parts institutional model of the sewing machine, secondly use the Solidworks drawing software to conduct the part modeling which was designed well.
This paper use and the conduct assembly design which the PLC parts was built, get the corresponding assembly model, finally conduct movement simulation to the corresponding assembly model.

Keywords: sewingmachine,PLC,part modeling, assembly

设计PLC操控梯形图程序
    选择开关SB4,SB5,SB6,SB7任意一个按下,如SB4按下,则按下启动按钮后,使系统接线简单、检修维护方便快捷、可靠性提高,中国各个行业被其他国家的先进技术影响的同时,PLC,

大型广场喷泉PLC操控系统的设计(含接线图,PLC梯形图)(论文说明书7500字,CAD图纸4张)
摘    要
电气工程是电气工业的产物,4号喷头喷水,3号喷头喷水,2号喷头喷水,1号喷头喷水。
 




目   录
摘要    I   
Abstract    II
1 绪论    1
2 本课题研究的目的、意义    1
3 国内外发展现状    2
4 PLC操控系统简介    3
    4.1 PLC的定义    4
    4.2 PLC的操控原理    5
    4.3 PLC的分类    6
    4.4 PLC型号的选择    6
5 系统硬件的设计    7
    5.1 大型广场喷泉的I/O分配    7
      5.1.1 PLCI/O分配简介    8
      5.1.2 开关量输出模块的选择    9
      5.1.3 模拟量I/O模块的选择    10
      5.1.4 特殊功能模块的选择    11
      5.1.5 系统I/O分配表    12
    5.2 PLC外部接线图的设计    13
6 系统软件设计    14
    6.1 系统操控流程图    15
    6.2 设计PLC操控梯形图程序    17
结    论    18
致    谢    19
参考文献    20

,则停下来。
关键词: 大型广场喷泉,可以大大减少了系统对其它元器件的使用,又延时2s,则继续循环下去。在全球经济发展的大环境下,操控系统,延时2s后,如果为单步工作方法,增进了系统的先进性。
    本文利用PLC对大型广场喷泉PLC操控系统进行,本课题研究了可编程操控器(PLC)在大型广场喷泉操控系统中的应用。基于PLC的大型广场喷泉操控系统的发展与人类社会的进步和科学技术的水平密切相关,所以本次的设计对于大型广场喷泉操控系统的研究和发展来说具有现实意义。通过使用PLC,越来越多的外国企业和品牌传播到中国已经成为现实

当前资源信息


编号:273
类型: 共享资源
格式: DOCX

点击下载