分析了混匀堆料机机械部分存在的问题和不足,均化,可编程序操控器,二极管最高方向工作电压URM为:    9
2.2.2 三端稳压器的输出电流的确定    10
第三章 变频器的基本原理及选型方法    12
3.1 变频器的基本原理    12
3.2变频器基本组成    12
3.3变频器选型    12
第四章 可编程操控器    13
4.1  S7-200 系列PLC系统的构成    13
4.1.1 S7-200系列PLC系统结构    13
4.1.2  输出接口电路    16
4.1.3 I/O点数的扩展和编码    17
4.2  S7-200的系统设计    17
4.2.1 系统使用PLC操控方案的确定    17
4.2.2 PLC  I /0点数的确定和选型    17
4.3堆料机I /0接口表    18
参考文献    19
附件    20
PLC程序语句    20

,不仅工艺指标明显改善,

混匀堆料机电气操控系统的设计(附PLC程序语句)(论文8100字)
摘要
对老装置进行更新改造。
2、混匀堆料机的机械部分和操控系统的改造研究。本文以DBH700-37型悬臂式混匀堆料机为主要研究对象,堆料机在氧化铝行业的使用情况。主要内容包括:
1、叙述了DBH700-3 7型悬臂式混匀堆料机的总体结构和工作原理,投资小,实现企业装备现代化的重要途径。分析了混匀堆料机的操控要求后,提出了具体的改造方案。
4、自动操控系统设计研究。深入研究了DBH700-37型悬臂式混匀堆料机的技术改造方法,目前我国混匀堆料机的技术现状,极限比较指令

Abstract
Renovation of the old equipment, small investment, quick. Enterprises to improve economic efficiency, to achieve an important way for enterprises with modern equipment. In this paper, DBH700-37 Cantilever mix stacker as the main object of study, combined with the production process requirements, ore mixing homogenizing way affect stoker metal structure of DBH700-37 Cantilever. Depth study DBH700-37 Cantilever mixing transformation method stoker, and put forward specific rehabilitation programs. The main contents include:
1, describes the DBH700-3 7 Cantilever mix overall structure and working principle stoker, the current state of the art of mixing stoker, the stoker in the alumina industry usage.
2. Retrofit of the mechanical parts and control systems feeder mix heap. Analysis of the problems and shortcomings mix stoker mechanical part, proposes ideas and solutions to problems.
4, the automatic control system design research. After analyzing the control requirements blending stacker, the study determined the structure and program flow PLC automatic control system.
5, installation and commissioning and the results analyzed. After transformation by DBH700-37 Cantilever mixing technical characteristics and use of results stoker were analyzed and summarized, not just process indicators improved significantly, and equipment and equipment level has been significantly improved, indicating that the transformation of this study is entirely feasible.
Keywords: blending stoker, homogenization, programmable logic controllers, rotary encoders, limit the comparison instruction

目录
摘要    2
Abstract    3
目录    4
第一章 概述    6
1.1堆料机的分类及工作原理    6
1.2本文的主要内容    7
1.2.1生产工艺要求    7
1.2.2操控要求    7
第二章 堆料机供电系统的设计    8
2.1 各系统用电容量归纳    8
2.1.2单相操控电源220V电压器规格的选取变压器容量计算    8
2.2 直流稳压电源    9
2.2.1 稳压器整流管及滤波电器的选择    9
对桥式整流电路,旋转编码器,提出解决问题的思路和方法。通过对改造后的DBH700-37型悬臂式混匀堆料机的技术特点及使用效果进行分析总结,矿石均化方法对DBH700-37型悬臂式混匀堆料机金属结构件的影响。
5、安装调试和使用效果分析。是企业提高经济效益,而且装置装备水平得到明显提高,结合生产工艺要求,研究确定了PLC自动操控系统的结构及程序流程。
关键词:混匀堆料机,见效快。说明本文的改造研究是完全可行

当前资源信息


编号:313
类型: 共享资源
格式: DOCX

点击下载