基于单片机的土壤温湿度操控系统设计(含电路图,程序)(论文10700字,CAD图纸4张)
摘 要
本设计基于CC2430无线片上系统为中心部件。本设计是土壤温湿度环境无线监测网络系统的初步设计,在保留了原始土壤温湿度操控系统的基本功能的同时又增加了一系列的实用功能并简化其电路结构,后待开发建立在IEEE 802.15.4的 ZigBee无线传感网络的最优建网方案。
关键词 单片机操控系统 可靠性 系统
Abstract
It can replace the heavy labor in order to achieve the production mechanization and automation, and can work in CC2430environments to protect the personal DS18B20safety, Therefore widely used in machine building, metallurgy, electronics, light industry and atomic energy sectors.This article is AT24C08 mainly of the pneumatic manipulator the overall design, and pneumatic design. This mechanism of manipulator includes cylinders and claws and connectors parts, it can move according to the due track on the ZigBee movement of grabbing.
carrying and unloading. The pneumatic part of the design is primarily to choose the right valves and design a reasonable pneumatic control loop, by controlling and regulating pressure, flow and direction of the compressed air to make it get the necessary strength, speed and changed the direction of movement in the prescribed procedure work.It can replace the heavy labor in order to achieve the production mechanization and automation, and can work in dangerous working environments to protect the personal safety.
Keywords Singlechip microcomputer Forging machine
目 录
1绪论 1
1.1课题的研究背景和历史意义 1
1.2系统功能概述 2
2 操控系统硬件设计 5
2.1单片机的作用和功能 6
2.2单片机的应用场合 7
3 硬件系统的设计 7
3.1各组成硬件概述 9
3.2无线传输中心技术 10
3.3 系统框图 10
3.4 网络系统框图 11
3.5 终端装置系统框图 12
4 终端装置方案选择 14
4.1数据采集 15
4.2数据显示 17
4.3数据存储 18
4.4按键操控 19
5 系统软件的设计 22
5.1系统软件总体设计 23
5.2各功能模块软件程序设计 24
5.3 程序清单 24
结论 25
致谢 26
参考文献 27