KEY WORDS: STC89C52 。其系统设计简单,低能耗,pedometer
 





目录
1引言    1
  1.1计步器的发展背景    1
  1.2 研究计步器的目的    1
  1.3 目标    1
2系统总体设计    1
  2.1 设计要求    1
  2.2 总框图    2
  2.3 传感器原理    2
  2.4 传感器及加速度传感器的比较    2
  2.5 传感器选择    4
  2.6 ADXL335功能框图及特点     4
 3 硬件电路设计    5
  3.1 传感器电路连接模块     4
  3.2 微处理模块    6
  3.3显示模块    7
4软件设计    8
  4.1 软件总体设计    8
5算法的实现    9
6制作与调试    10
  6.1硬件单片机连接图    11
  6.2硬件与软件协同调试    12
  6.3 调试    13
  6.4 实测及误差分析    13
7结论    14
 致谢    15
参考文献    16

,ADXL345 ,

基于单片机的简易计步器设计(附实物图,电路原理图,程序)(论文9800字)
摘要
简易的计步器运用人在运动状态下加速度信息来判断步伐的计步器, STC 89C52

The Pedometer Design Based on Single Chip Microcomputer
Electronic Information Science and Technology  2012-1  Hu lina
Supervisor  Lv jier
Abstract
Pedometer function can describes the use of people move to detect changes generated when the acceleration of steps, utilization of implementation scheme pedometer, small size, low power consumption, high ADXL345 three axis acceleration sensor, chip can put the data acquisition to internal data processing for the digital data acquisition to acceleration data, after appropriate algorithm can achieve plan step function. This paper introduces the design of a paragraph of the pedometer ADXL345 based on acceleration sensor. Introduces the software algorithm real pedometer while the SPI has integrated chip I²C interface, and I can be conveniently data transmission to the main control chip. The system is simple in design, realization convenient. The chip can also extend to other need to measure the applications。基于加速度传感器ADXL345设计的一款计步器。
关键字:ADXL345三轴加速度传感器,将收集的加速度信息再运用合理的算法就可实现计算出人行走的步伐。其运用的传感器还可以运用到其它以加速度为参量的检测场合。高精度的ADXL345(加速度传感器),运用其小体积,计步器,芯片内部集成了A/D转换器可以直接将采集来的模拟信号转换为数字信息,结构简单

当前资源信息


编号:452
类型: 共享资源
格式: DOCX

点击下载