本实验用Matlab软件Simulink仿真增量调制编码与解码系统,再送到△M接收模块,Hainan Normal University, Haikou, 571158 )

Abstract: Differential pulse code modulation (DPCM) is a widely used speech coding method which uses the value of the adjacent sample correlation between the encoded data rate reduction. Delta modulation (△ M) is a differential pulse code modulation of a simplified form, it has a simple structure, high efficiency coding, error resilient performance characteristics. Simulink simulation of the experimental delta modulation encoding and decoding system, to read pre-recorded voice on your hard drive data to send to the module △ M, and then to the △ M receiver module, and finally to the voice output device.
Key words: Code modulation (DPCM), Matlab software,  delta modulation

,

海 南 师 范 大 学
本 科 生 毕 业 论 文

题目:语音信号增量调制的研究及仿真
目   录
1. 引言¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨ 1
2. 原理¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨ 2
2.1 抽样定理¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨ 2
2.2 波形的量化 ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ 5
2.3语音的波形编码¨¨¨¨¨¨¨¨¨ ¨¨¨¨¨¨2      
 2.3.1 脉冲编码调制(PCM)¨¨¨¨¨¨¨¨¨¨ 6 
2.3.2 差分脉冲编码调制(DPCM) ¨¨¨¨¨¨¨ 4
2.4增量调制¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨
  2.4.1 增量调制原理¨¨¨¨¨¨¨¨¨¨¨¨
  2.4.2 △M的性能¨¨¨¨¨¨¨¨¨¨¨¨¨
  2.4.3增量调制的实验原理¨¨¨¨¨¨¨¨¨¨
3.MATLAB软件 ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨  7
3.1 MATLAB软件介绍 ¨¨¨¨¨¨¨¨¨¨¨¨ ¨  7
    3.2 MATLAB仿真技术的发展、应用及特点¨¨¨¨¨¨
    3.3 Simulink相关模块¨¨¨¨¨¨¨¨¨¨¨¨ ¨ 8
4.软件仿真¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨  9
4.1  仿真模型结构和主要参数设置 ¨¨¨¨¨¨¨¨ 9
4.2  增量调制系统总体架构图 ¨¨¨¨¨¨¨¨¨¨ 9
4.3  仿真结果 ¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨  13
5.结束语¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨ ¨¨¨¨   13
参考文献¨¨¨¨¨¨¨¨¨¨ ¨¨¨ ¨¨¨¨¨¨¨13
语音信号增量调制的研究及仿真


  摘 要:差分脉冲编码调制(DPCM)是一种广泛使用的语音编码方法。增量调制(△M)是差分脉冲编码调制的一种简化形式,它具有结构简单、编码效率高、抗误码性能好等特点。
关键词:编码调制(DPCM) Matlab软件  增量调制
  Delta modulation of speech signals and simulation
Author: Chen Man Tutor: Tian Dao
(Electronic Information Science and Technology Department, Institute of electrical materials ,它利用相邻抽样值之间的相关性减少编码的数据率。送到△M发送模块,读取事先录制在硬盘上的语音数据,最后送到语音输出装置

当前资源信息


编号:5062
类型: 共享资源
格式: DOCX

点击下载